User manual
Table Of Contents
- 1 FOREWORD
- 2 INTRODUCTION
- 3 PRINCIPLE OF OPERATION
- OPTIONS AND SPECIFICATION
- INSTALLATION REQUIREMENTS
- INSTALLATION
- 7 MECHANICAL
- 8 OUTPUT FORMATS
- 9 ANALOGUE OUTPUTS AND OPTIONS
- 10 METPAK SDI-12
- 11 MAINTENANCE & FAULT-FINDING
- 12 TESTS
- 13 APPENDICES
- CS215_jun06.pdf
Figures
1. Screen Capture of SDI-12 Transparent Mode on Edlog Array-Based Datalogger
(CR10X) using Control Port 8 and Changing SDI-12 Address from 0 to 1 .....10
2. Screen Capture of SDI-12 Transparent Mode on Edlog Table Based Datalogger
using Control Port 8 and Changing SDI-12 Address from 0 to 1.....................11
3. Screen Capture of SDI-12 Transparent Mode on CRBasic CR200 Series
Datalogger using Control Port C1/SDI12 and Changing SDI-12 Address
from 0 to 1.........................................................................................................12
4a. Correct Fitment of Sensor Element (Side View) .............................................15
4b. Incorrect Fitment of Sensor Element (Side View)...........................................15
A-1 Normal Operating Conditions of RH Element ............................................ A-2
Tables
1. Cable Connections...............................................................................................3
A-1 Environmental Tests.................................................................................... A-1
ii