User manual
Table Of Contents
- 1 FOREWORD
- 2 INTRODUCTION
- 3 PRINCIPLE OF OPERATION
- OPTIONS AND SPECIFICATION
- INSTALLATION REQUIREMENTS
- INSTALLATION
- 7 MECHANICAL
- 8 OUTPUT FORMATS
- 9 ANALOGUE OUTPUTS AND OPTIONS
- 10 METPAK SDI-12
- 11 MAINTENANCE & FAULT-FINDING
- 12 TESTS
- 13 APPENDICES
- CS215_jun06.pdf
MetPak Doc No 1575-PS-0001 Issue 02 CN 4240 March 2006
4.3 Aspiration Shield
Secification for model 41003 is contained in appendix 13.4
4.4 Temperature and Humidity Sensor
Specification for the CS215 and HygroClip,temperature and relative humidity are contained in appendices 13.5 and 13.6
4.5 Complete Assmebly
Material:-
White thermoplastic UV-stabalized for long term weather resistance. Gloss white painted aluminium mounting bracket
(with moulded plastic V-block and satinless steel U-bolt) which allows it to be attached to a vertical pipe of any diameter
between 25mm and 50mm.
Power Requirement:-
Option 1 6-16Vdc @ 22mA typical
Option 3 10-28Vdc @ 28mA typical
Power requirements for the other options are dependant on temperature and relative humidity probes fitted. Refere to
manuals in appendices 13.5 and 13.6.
Size and Weight:-
Size 142mm dia x 380mm height (instrument)
Weight 1.1kg (including bracket)
For delivery the MetPak is contained in custom designed packaging. All the packaging should be retained for use if the
unit has to be returned at any time.
9