Instruction manual

CS215 Temperature and Relative Humidity Probe
4. Quickstart
Short Cut is an easy way to program your datalogger to measure the CS215
sensor and assign datalogger wiring terminals. Use the following procedure to
get started.
1. Install Short Cut by clicking on the install file icon. Get the install file
from either www.campbellsci.com, the ResourceDVD, or find it in
installations of LoggerNet, PC200W, PC400, or RTDAQ software.
2. The Short Cut installation should place a shortcut icon on the desktop of
your computer. To open Short Cut, click on this icon.
3. When Short Cut opens, select New Program.
4. Select Datalogger Model and Scan Interval. Click Next.
2