User manual

CS-GSM/GPRS Digital Transceiver Kits (including the COM110A modem)
A-4
2: 1 Disabled when User Flag 1 is High
3: 20 Seconds Call Time Limit ; More than enough time to send
command
4: 30 Seconds Before Fast Retry ; just in case
5: 1 Fast Retries ;try just once more
6: 9999 Minutes before Slow Retry ; don't try for a long time
otherwise
7: 3 Failures Loc [ BadPINcnt ]
8: 0000 Call-back ID ; set to 0 indicates not a proper call
6: Extended Parameters 4 Digit (P68)
1: 68 Option ;D wait
2: 50 Option ; 5 seconds for the COM110A to power up
3: 87 Option ;Set wait delay to wait for up to
4: 50 -- Option ;5 sec for any response, aborting if not received
5: 69 Option ;E - transmit with echo
6: 17 Option ;17 chars - change for length of PIN code
7: 65 Option ;A
8: 84 Option ;T
7: Extended Parameters 4 Digit (P68)
1: 43 Option ;+
2: 67 Option ;C
3: 80 Option ;P
4: 73 Option ;I
5: 78 Option ;N
6: 61 Option ;=
7: 54 Option ;6
8: 54 Option ;6 This example uses a PIN code of 66011411
8: Extended Parameters 4 Digit (P68)
1: 48 Option ;0
2: 49 Option ;1
3: 49 Option ;1
4: 52 Option ;4
5: 49 Option ;1
6: 49 Option ;1
7: 13 Option ;CR
8: 82 Option ;R to wait for response
9: Extended Parameters 4 Digit (P68)
1: 2 Option ;2 characters
2: 79 Option ;O
3: 75 Option ;K
4: 13 Option ;<CR>
5: 0000 Option
6: 0000 Option
7: 0000 Option
8: 0000 Option
; Now the instructions to turn it off
; At 10 past the hour set flag 2 to indicate to turn off
10: If time is (P92)
1: 10 Minutes (Seconds --) into a
2: 60 Interval (same units as above)
3: 12 Set Flag 2 High
;If the logger is not communicating, i.e. ‘Modem is Off’ (ME line low)
;then if flag 2 is high
11: If Flag/Port (P91)
1: 50 Do if Modem is Off