Instruction manual

CFM100 Compact Flash Module
3) If neither Run on Power-up nor Run Now programs are changed, the previous
Run on Power-up program runs.
2.3.4 Example Power-up.ini Files
Example 2.3.4-1 through Example 2.3.4-6 are example powerup.ini files.
EXAMPLE 2.3.4-1. Run Program on Power-up.
’Copy pwrup.cr1 to USR:, will run only when powered-up later
2,pwrup.cr1,usr:
EXAMPLE 2.3.4-2. Format the USR: drive.
’Format the USR: drive
5,,usr:
EXAMPLE 2.3.4-3. Send OS on Power-up.
’Load this file into FLASH as the new OS
9,CR1000.Std.04.obj
EXAMPLE 2.3.4-4. Run Program from CRD: drive.
’Leave program on CRD:, run always, erase CRD: data files
13,toobigforcpu.cr1,crd:
EXAMPLE 2.3.4-5. Run Program Always, Erase CF data.
’Run always, erase CRD: data files
13,pwrup_1.cr1,crd
EXAMPLE 2.3.4-6. Run Program Now, Erase CF data.
’Copy run.cr1 to CPU:, erase CF data, run CPU:run.cr1, but not if later powered-up
14,run.cr1,cpu:
2.4 Camera Files
JPEG images taken by a digital camera connected to the datalogger can be stored
to the CF card rather than CPU memory. This is done by configuring the PakBus
setting “Files Manager” for the datalogger. This can be done using the Device
Configuration Utility or PakBus Graph.
2-4