User guide

User Guide
15
Figure 17: Generic - Hardware Configuration
5.1.4 Step 4: Generic Modem Configuration Continued
Click on the Modem tab located next to the Hardware tab (Figure 18). Set the RTS
CTS Use to “3. The RTS line will be lowered”.
In the Dial Script box enter the following string:
T"^m" "ATV1&D0&K0^m" R"OK"1200
"ATDT00XXXXXXXXXXXX^m" R"CONNECT"50000
and to the End Script enter:
T"+++" R"OK"1200 "ATH^m" R"OK"2000
The “X”s in the Dial Script represent the number of the remote modem being used.
You must enter the 12-digit number supplied by your service provider.