User guide

9522B & COM9522B Iridium Data Modem
6
3.2.2 Step 2: Start Hyperterminal
Open a new session of Hyperterminal from the Start Menu under: Start, All Programs,
Accessories, Communications. Choose a name for the connection (Figure 4).
Figure 4. Starting a Hyperterminal Session
3.2.3 Step 3: Hyperterminal Connection Type
After clicking OK the next screen should resemble Figure 5. This screen allows you
to select what type of connection you will establish.
Figure 5. Hyperterminal Connection Type
Click on the pull down tab next to the box marked ‘Connect using’. Select the COM
port to which the modem is currently connected. In this example we use COM1
(Figure 6). Click OK.