Instruction manual
9522B Iridium Satellite Modem and COM9522B Interface Modem
5.1.4 Step 4: Generic Modem Configuration Continued
Click on the Modem tab located next to the Hardware tab (FIGURE 5-4). Set
the RTS CTS Use to “3. The RTS line will be lowered”.
In the Dial Script box enter the following string:
T"^m" "ATV1&D0&K0^m" R"OK"1200
"ATDT00XXXXXXXXXXXX^m" R"CONNECT"50000
and in the End Script enter:
T"+++" R"OK"1200 "ATH^m" R"OK"2000
The Xs in the Dial Script represent the number of the remote
modem being used. You must enter the 12-digit number supplied
by your service provider.
FIGURE 5-4. Generic – Modem Configuration
NOTE
15