Specifications

CC640 Digital Camera

2. Introduction

The CC640 digital camera was designed to meet the stringent operational

requirements necessary for remote battery powered installations. The CC640

has a very low quiescent power draw and can operate over a wide temperature

range.

The camera contains a compact flash memory card interface that turns the

camera into a powerful image logger. The combination of JPEG compression

and memory card storage enables the CC640 to store over 10,000 images.

The CC640 can operate in a stand-alone mode with image acquisitions

triggered by the cameras own precision real time clock. Image acquisitions can

also be triggered by an externally applied digital signal.

FIGURE 1. CC640 Camera

2.1 Connecting

The camera can be connected to the datalogger and power supply using the

wiring recommendations in Table 1, Cable Color Connections. The wiring is

based on the use of the recommended 9721-L cable supplied by Campbell

Scientific.

It is essential that the Ground cable be connected first when

wiring the camera to the datalogger or the power supply.

NOTE