Specifications

CC640 Digital Camera
FIGURE 4. Open the Contact
When the screwdriver is aligned, push the screwdriver in while moving the
screwdriver to the position shown. You’ll feel pressure against the screwdriver
as it is opening the contact. The screwdriver will bottom out and will stay in
place so that wires can be inserter or removed as needed.
FIGURE 5. Remove the Screwdriver
When the screwdriver is removed, the contact closes holding the wire in place.
4.3 RS-232 Port
The RS-232 port provides an RS-232 communication port for transmitting
image files to a datalogger using the PakBus Protocol, and configuring the
camera.
TABLE 3. Camera to Datalogger
RS-232 port using #19504
RS-232 connection 9 pin to 9 pin
COMCBL1-L 17855
YL YL
WH BN
BN WH
Camera data cable junction terminals Logger Rs-232 port
C1947-----Æ COMCBL1-Æ 19504 contact kit---Æ 17855 (SC110)
10