Instruction manual

AM16/32 Relay Analog Multiplexer
10
With panel switch set to “2X32” mode the white channel numbers apply. The
SETs are labeled beginning with 1H, 1L and ending with 32H, 32L. In “2X32”
mode when the AM16/32 selects a given channel the “H” sensor terminal is
relay connected to both COM “H” terminals and the “L” sensor terminal is
connected to both COM “L” terminals (COM ODD H connects to COM EVEN
H and COM ODD L connects to COM EVEN L when panel switch is in
“2X32” mode).
5. Datalogger Programming
A good way for the beginner or veteran datalogger programmer to create an
AM16/32 program is to obtain a copy of SCWIN (Short Cut Program Builder
for Windows). It can be downloaded free of charge from the Campbell
Scientific web site (http://www.campbellsci.com). SCWIN can build many
program configurations for various supported sensors providing a quick way to
generate an application program.
FIGURE 6. SCWIN (Short Cut for Windows Program Builder)