Specifications

ISU AT Command Reference Phase II AT Commands
Iridium Proprietary Version 2.45
20 June 2011 47
6.22 +CSCA - SMS Service Center Address
Set Command: +CSCA=<sca>[,<tosca>]
Set command updates the SMSC address, through which mobile originated SMs are transmitted. In PDU
mode, setting is used by the send and write commands, but only when the length of the SMSC address
coded into <pdu> parameter equals zero.
<sca>: GSM 04.11 RP SC address Address-Value field in string format (i.e., enclosed by quotes ““);
<tosca>: GSM 04.11 RP SC address Type-of-Address octet in integer format;
Read Command: +CSCA?
Read command returns the current service center address. Response is in the form:
+CSCA: <sca>,<tosca>
6.23 +CSCB - Select Cell Broadcast Message Types
Set Command: +CSCB=[<mode>[,<mids>[,<dcss>]]]
Set command selects which types of CBMs are to be received by the ME.
No action, compatibility only.
Read Command: +CSCB?
Read command returns the current values for <mode>, <mids> and <dcss>. Response is in the form:
+CSCB: <mode>,<mids>,<dcss>
Test Command: +CSCB=?
Test command returns supported modes. Response is in the form:
+CSCB: (list of supported <mode>s)
6.24 +CSCS - Select TE Character Set
Set Command: +CSCS=[<chset>]
Set command informs the phone which character set <chset> is used by the DTE. Only the IRA character
set is currently supported. <chset> should be of string type enclosed by ““; for example, “IRA”.
Valid values for <chset> are:
"IRA" international reference alphabet (ITU-T T.50)
Read Command: +CSCS?
Read command returns the current character set used. Response is in the form:
+CSCS: <chset>
Test Command: +CSCS=?
Test command returns the supported character set of the phone. Response is in the form:
+CSCS: (list of supported <chset>s)