Specifications

ISU AT Command Reference Phase I AT Commands
Iridium Proprietary Version 2.45
20 June 2011 24
5.35 &Rn - RTS/CTS Option
Select how the ISU controls CTS.
No action, compatibility only.
Allowed values for n are 0 and 1.
5.36 &Sn - DSR Override
Define the behavior of DSR.
0 DSR always active (default).
1 Same as 0.
5.37 &V - View Active and Stored Configuration
View the current active configuration and stored profiles.
5.38 &Wn - Store Active Configuration
Store the active profile in non-volatile memory. This is used to store user configurations for later use.
0 Store current (active) configuration as profile 0.
1 Store current (active) configuration as profile 1.
5.39 &Xn - Select Synchronous Clock
Select the source of the transmit clock for synchronous mode of operation.
No action, compatibility only.
Any value for n is accepted.
5.40 &Yn - Designate Default Reset Profile
Select profile for use after power-up.
0 Select profile 0 (default).
1 Select profile 1.
5.41 \An - MNP Block Size
Select maximum MNP block size.
No action, compatibility only.