Specifications

ISU AT Command Reference Phase VII AT Commands
Iridium Proprietary Version 2.45
20 June 2011 109
<index> can be from 0 to 2.
<recipient> can be an email address or phone number.
Query Command: + LBSEMR=?
Return the number of configured emergency call recipients as:
+LBSEMR: <n>
This command is available in the 9575 only, in firmware from HL11006 onwards. This command does not
support command concatenation in the 9575 handset.
Attempting to change settings when the GPS Settings Lock is enabled will return +CME
ERROR:146 (GPS Settings Lock PIN required).
11.36 + LBSECMD – Delete emergency message recipients
Exec Command: + LBSEMD=<index>
Delete the emergency message recipient at index <index> where <index> may be:
“All” (case insensitive) to delete all
0, 1, or 2 to delete entry 0, 1 or 2 in the list
This command is available in the 9575 only, in firmware from HL11006 onwards. This command does not
support command concatenation in the 9575 handset.
Attempting to change settings when the GPS Settings Lock is enabled will return +CME
ERROR:146 (GPS Settings Lock PIN required).
11.37 + LBSEDM – Emergency delivery mode
Exec Command: + LBSEDM =<mode>
Set the emergency delivery mode to <mode>
where <mode>:
0 Message and call
1 Message only
2 Call only
Query Command: + LBSEDM=?
Return the configured emergency delivery mode as:
+LBSECR: <mode>
This command is available in the 9575 only, in firmware from HL11006 onwards. This command does not
support command concatenation in the 9575 handset.
Attempting to change settings when the GPS Settings Lock is enabled will return +CME
ERROR:146 (GPS Settings Lock PIN required).