Specifications

ISU AT Command Reference Phase VII AT Commands
Iridium Proprietary Version 2.45
20 June 2011 108
This command applies to the 9555 and 9555A Handsets only.
This command does not support command concatenation in the 9555 and 9555A Handsets.
11.32 +REBOOT – Reboot handset
Exec Command: +REBOOT
Execution command reboots the handset after a short delay.
This command applies to the 9555 and 9555A Handsets only.
Note this command is intended for use by Iridium supplied tools only and not by end users. This command
is not available on the 9522B LBT.
This command does not support command concatenation in the 9555 and 9555A Handsets.
11.33 + LBSECR – Emergency call recipient
Exec Command: + LBSECR =<number>
Set the emergency call recipient to <number>
Query Command: + LBSECR=?
Return the configured emergency call recipient as:
+LBSECR: <number>
This command is available in the 9575 only, in firmware from HL11006 onwards. This command does not
support command concatenation in the 9575 handset.
Attempting to change settings when the GPS Settings Lock is enabled will return +CME
ERROR:146 (GPS Settings Lock PIN required).
11.34 + LBSECRD – Emergency call recipient
Exec Command: + LBSECD
Delete the emergency call recipient
This command is available in the 9575 only, in firmware from HL11006 onwards. This command does not
support command concatenation in the 9575 handset.
Attempting to change settings when the GPS Settings Lock is enabled will return +CME
ERROR:146 (GPS Settings Lock PIN required).
11.35 + LBSEMR – Emergency message recipients
Exec Command: + LBSEMR =<index>[,<recipient>]
If <recipient> is given, set the emergency message recipient at index <index> to <recipient>.
If <recipient> is not given, return the configured emergency message recipient at index <index> as:
+LBSEMR: <recipient>