Instruction manual

9522B Iridium Satellite Modem
_____________________________________________________________________________
5
For the ease of installation the C2626 right angle sma adaptor is
used between the 9522B antenna connector and the SAF5350A
antenna cable.
The antenna mounts to a ¾” diameter pipe which can be
connected to a horizontal arm using a nu-rail connector. The nu-
rail connector used will depend on the type of horizontal pipe.
For a ¾” pipe, use #L1017, for a 1” pipe use #L1049.
Base Station Remote Station
9522B L-Band Data Modem 9522B L-Band Data Modem
SAF5350A antenna plus cable SAF5350A antenna plus cable
C2626 Right Angle SMA adaptor (may be
required depending on installation)
C2626 Right Angle SMA adaptor
C2462 (use L10873 – sold separate) C2462 (use L10873 supplied with SC932A)
Iridium SIM card (comes with modem)
SC932A & L14394 Mounting Bracket (for
datalogger CS I/O communication port)
C2440 mounting kit for SAF5350A antenna
Iridium SIM card (comes with modem)
C2440 mounting kit for SAF5350A antenna
Table 1: Equipment List for Base and Remote Stations
1.3. Hardware Overview
Figures 1 and 2 display the hardware typically used for both a
Base and Remote station. At this time the datalogger, the power
supply, and other peripherals are not shown. Please refer to
Appendix B for a thorough description of the installation
procedure for both the Base and Remote stations.
Warning: Be sure that the SAF5350A antenna is connected to either of
the modems before applying power, as damage to the
equipment may occur.
Hardware Description Colour Connection
9522B
Antenna
“ANT” SMA connector to antenna cable
using C2626 adaptor
C2462 Interface 26-pin ribbon cable connector
C2462
Power Control Orange Control Port Datalogger (5V power trigger)
Power Control Reference Black G - Datalogger
Modem Power Red +12V (Direct to Station Power Supply)
Power Reference Black G (Direct to Station Power Supply)
SC932A
“DCE Device” L10873 9-pin connector of C2462
“Datalogger” SC12 CS I/O port of Datalogger
Table 2: Remote Station C2462 Wiring