Instruction manual

9522B Iridium Satellite Modem

_____________________________________________________________________________

Problem: Loggernet makes several attempts to connect to the

remote station with no success. The failure is not immediate and

the Loggernet LogTool may show a “No Carrier Detected” error.

Solution: It is possible that the base modem has lost it’s

configuration. Resend the configuration as shown in Section 2.2

of this manual and attempt communications again.

Problem: I am using Iridium to communicate through the CS I/O

port on my datalogger. Whenever I try connecting with the

datalogger LoggerNet reports that communication with the

station has failed. This message takes several seconds to

appear.

Solution: You may have connected your SC932A device

backwards at the remote station. When you install the SC932A it

is imperative to make sure that the device is connected in the

proper way. Follow the label on the device for the proper

connections.