Instruction manual

9522B Iridium Satellite Modem

_____________________________________________________________________________

3.1.2. Step 2: ComPort Configuration

With the Setup tree entered, you will now need to complete the

configuration of each element. Start with selecting the ComPort

element at the root of the tree (Figure 15). Be sure that the

Com Port Connection is correct for the computer used as part of

your Base Station, and make sure that the Communications

Enabled box is checked. Under Delay Hangup, add a delay of

200 ms. This will prevent LoggerNet from hanging up whenever

there is a slight lag in transmission time, which is common in

Satellite applications.

Figure 15: ComPort Configuration

3.1.3. Step 3: PhoneBase Configuration

Select the PhoneBase element as in Figure 16. Be sure the

Communications Enabled box is checked. Adjust the Maximum

Baud Rate to 19200 Baud (9600 for a CR10X) and add a 200 ms

delay. You will need to configure a custom modem initialization

string for use with the base modem. Click the Edit Modem

Database button. Click the New button, name the string, leave

the Reset string blank, and insert only &C0 as the initialization

string. Be sure to save the new string (Steps not shown). Move

to the PhoneRemote element once complete.