Instruction manual

9522B Iridium Satellite Modem

_____________________________________________________________________________

3. LoggerNet Configuration

This Section deals with the proper software setup of a remote

station in Campbell Scientific’s LoggerNet datalogger support

software. All screenshots are based on the CR1000 datalogger.

Please note that the array based dataloggers (i.e. CR10X) can

also be configured in a similar fashion in LoggerNet.

3.1.1. Step 1: LoggerNet Setup

Start the LoggerNet software package and open the Setup

applet from the main menu. Start the configuration by clicking on

the Add Root button. From the “Add” submenu make the

following selections:

 ComPort,

 PhoneBase,

 PhoneRemote,

 Generic,

 PakBusPort

 CR1000

Finally click the close button in “Add” submenu. Your setup tree

should appear as in Figure 14.

Figure 14: LoggerNet Setup Tree