Instruction manual

9522B Iridium Satellite Modem

_____________________________________________________________________________

Figure 10: Hyperterminal Screen

Type the following command string that correlates to the

datalogger and/or Baud rate being used:

CR1000: AT&F0 S0=1 &D0 +IPR=6,0 V0 &K0 &W0 &Y0

CR10X: AT&F0 S0=1 &D0 +IPR=5,0 V0 &K0 &W0 &Y0

The appropriate command string will need to be used in both

modems.

Press “Enter” once the string has been input. See Figures 11

and 12 for an example.

Figure 11: CR1000 AT Command String

The modem should return a 0 in the place of the first character

(Figure 12).