Specifications

19
Metadata after maintenance / establishment
Latitude (dd mm.mmm)
Longitude (dd mm.mmm)
Photos of tripod, sensors, logger box wiring etc. Y / N
Mast inclination in CNR1 direction (+ if CNR1 tilting down)

Mast incl. across boom looking from CNR1 (- if clockwise)

Boom direction relative to true/magnetic north
 true / magn
Young box direction along boom? If not, measure direction Y / N
CNR1 aligned with mast and inclinometer? If not, measure Y / N
Young height (center of propeller – surface) cm
Rotronic height (bottom of casing – surface) cm
SR50 height on AWS (membrane – surface) cm
SR50 height on stakes (membrane – surface) cm
Free length of stake – outer, holding boom with SR50 cm
Free length of stake – middle cm
Free length of stake – outer, holding boom without SR50 cm
Number of 2-m pieces used for new stakes 1 / 2 / 3 / 4 / 5
Length of ablation sensor tubing on the surface (to T-piece) cm
Or: depth of ablation sensor using markings on hose cm
Length of thermistor string on surface from surface marking cm
Approximate height of surface irregularities cm
Time of departure
Remarks: