Specifications

Appendix A. Door Switch
4. Mount the switch to the enclosure case using two #17909 screws and two
#8548 nuts (see Figure A.1-9).
FIGURE A.1-9. The switch mounts inside the enclosure case.
Line up the switch so that the screws fit in the holes previously drilled.
5. As shown in Figure A.1-10, assemble the actuator and mount it in the
enclosure door.
FIGURE A.1-10. The actuator mounts inside the enclosure lid.
Line up the actuator so that the screws fit in the holes previously drilled.
A-5