Owner manual

UT10 Weather Station
adjustable leveling screws to level the sensor. The CMP3 and LP02
pyranometers include their own bubble level and leveling screws allowing
them to attach directly to the CM225.
2. Mount the sensor to the leveling base or CM225.
3. Attach the CM225 to a tower leg, mast, or CM200-series crossarm. If
attaching to a tower leg or mast, place the CM225’s U-bolt in the side
holes (FIGURE 7-11). If attaching to a crossarm, place the CM225’s
bottom holes (FIGURE 7-10).
FIGURE 7-10. CM225 Solar Radiation Mount with a LI2003S Leveling
Base and LI200X Solar Radiation Sensor
FIGURE 7-11. CM225 Attached to a Mast
15