Instruction Manual

TurfWeather Weather Station
4. Quickstart Guide
4.1 Computer Requirements
• Windows Operating System: 8, 7, Vista, or XP
• Available serial port or USB port (serial-to-USB converter cable required)
4.2 TurfWeather Setup Procedure
1. Use the lift straps to remove the weather station from the box (see
FIGURE 4-1).
2. Unpack the other equipment from the box.
FIGURE 4-1. Box of standard and wireless equipment. The lift straps
allow easy removal of the weather station from the box.
3. Install the Campbell Scientific PC200W Software on your computer.
4. Remove the dust cover from the TurfWeather’s RS-232 port and connect
the serial cable’s male connector to it (FIGURE 4-2).
5. Connect the serial cable’s female connector to a computer’s 9-pin serial
port.
Lift Straps
2