Owner's manual

Display Option Description Notes
dynamic parameter #12. (see section 3.4.4).
IsotopeRatio Isotope ratio (‰) calculated from concentrations for ramp A and ramp B. Note that if
Rstandard is set to zero, then the isotope ratio is set to zero.
2
Mean Ratio Isotope ratio (‰), calculated from mean concentration for ramp A and ramp B 2
Ratio StDev Standard deviation of the isotope ratio (‰), where the averaging period is specified by
dynamic parameter #12 (see section 3.4.4).
2
RampB Offset Ramp B Offset Current (mA) 2
TGA Analog 1 TGA Analog Channel 1 voltage (V)
TGA Analog 2 TGA Analog Channel 1 voltage (V)
TGA Analog 3 TGA Analog Channel 1 voltage (V)
PC Analog 1 PC Analog Channel 1 voltage (V)
PC Analog 2 PC Analog Channel 2 voltage (V)
PC Analog 3 PC Analog Channel 3 voltage (V)
PC Analog 4 PC Analog Channel 4 voltage (V)
PC Analog 5 PC Analog Channel 5 voltage (V)
PC Analog 6 PC Analog Channel 6 voltage (V)
PC Analog 7 PC Analog Channel 7 voltage (V)
PC Analog 8 PC Analog Channel 8 voltage (V)
Ux, m/s CSAT3 wind speed component U
x
(m s
-1
) 3
Uy, m/s CSAT3 wind speed component U
y
(m s
-1
) 3
Uz, m/s CSAT3 wind speed component U
z
(m s
-1
) 3
T_Sonic, deg CSAT3 sonic temperature (°C) 3
Diagnostic W CSAT3 diagnostic word 3
Other Dev 1 CR9000 data value 1 4
Other Dev 2 CR9000 data value 2 4
Other Dev 3 CR9000 data value 3 4
Other Dev 4 CR9000 data value 4 4
Other Dev 5 CR9000 data value 5 4
Other Dev 6 CR9000 data value 6 4
Other Dev 7 CR9000 data value 7 4
Other Dev 8 CR9000 data value 8 4
Other Dev 9 CR9000 data value 9 4
Other Dev 10 CR9000 data value 10 4
Other Dev 11 CR9000 data value 11 4
Other Dev 12 CR9000 data value 12 4
Other Dev 13 CR9000 data value 13 4
Other Dev 14 CR9000 data value 14 4
Other Dev 15 CR9000 data value 15 4
M/S 1 Conc Trace gas concentration (ppm) of TGA slave #1 1, 5
M/S 2 Conc Trace gas concentration (ppm) of TGA slave #2 1, 5
105