Services Rain Gage

TB4 and TB4MM Rain Gage

'Main Program

BeginProg

Scan (1,Sec)

'TB4 Rain Gage measurement Rain-mm

PulseCount (Rain_mm,C2,2,0,.254,0) ; Black wire connected to C2

'Call Data Tables and Store Data

CallTable (Rain)

NextScan

EndProg

5.2.3 CR10X Control Port Example

Although this program is for the CR10X datalogger, our CR500, CR510, and

CR23X are programmed similarly.

;{CR10X}

*Table 1 Program

01: 1.0000 Execution Interval (seconds)

1: Pulse (P3)

1: 1 Reps

2: 8 Control Port 8 (switch closure only) ;Black wire connect to C8

3: 2 Switch Closure, All Counts

4: 1 Loc [ Rain_mm ]

5: .254 Multiplier

6: 0 Offset

2: If time is (P92)

1: 0 Minutes (Seconds --) into a

2: 60 Interval (same units as above)

3: 10 Set Output Flag High (Flag 0)

3: Set Active Storage Area (P80)

1: 1 Final Storage Area 1

2: 101 Array ID

4: Real Time (P77)

1: 1220 Year,Day,Hour/Minute (midnight = 2400)

5: Sample (P70)

1: 1 Reps

2: 1 Loc [ Rain_mm ]

*Table 2 Program

01: 0.0000 Execution Interval (seconds)

*Table 3 Subroutines

End Program