Instruction Manual

NR01 Four-Component Net Radiation Sensor

2: Scaling Array (A*Loc+B) (P53)

1: 1 Start Loc [ SR01_up ]

2: 65.146 A1 ;SR01 up

3: 0 B1

4: 75.18 A2 ;SR01 down

5: 0.0 B2

6: 117.65 A3 ;IR01 up

7: 0.0 B3

8: 121.95 A4 ;IR01 down

9: 0.0 B4

;Measure the IR01 temperature

3: Full Bridge w/mv Excit (P9)

1: 1 Reps

2: 32 50 mV, 50 Hz Reject, Slow, Ex Range**

3: 32 50 mV, 50 Hz Reject, Slow, Br Range**

4: 3* DIFF Channel

5: 1 Excite all reps w/Exchan 1

6: 4200 mV Excitation***

7: 5 Loc [ IR01_TC ]

8: 1 Multiplier

9: 0.0 Offset

4: Temperature RTD (P16)

1: 1 Reps

2: 5 R/R0 Loc [ IR01_TC ]

3: 5 Loc [ IR01_TC ]

4: 1.0 Multiplier

5: 0.0 Offset

;Also create a temperature in K for use in optional online

;calculation of fluxes

5: Z=X+F (P34)

1: 5 X Loc [ IR01_TC ]

2: 273.15 F

3: 6 Z Loc [ IR01_TK ]

;In this example just output the scaled flux measurements

6: If time is (P92)

1: 0 Minutes (Seconds --) into a

2: 60 Interval (same units as above)

3: 10 Set Output Flag High (Flag 0)

7: Real Time (P77)

1: 0220 Day,Hour/Minute (midnight = 2400)

8: Average (P71)

1: 6 Reps

2: 1 Loc [ SR01_up ]

Note: Proper entries will vary with program and *input channel usage. For other loggers use:

** 25 mV range for CR10X, 50 mV for 21X and CR7

*** 4200 mV for 21X and CR7, 2100 mV for CR10X