Owner manual

DataView (CD294) Dual Line Data Display

5. Mounting in Enclosure Door

Use the template provided to mark out the four mounting holes and cut-

out for the CD294. Drill the four corner holes using a 4.5 mm drill and

cut out the mounting hole using a jig-saw or nibbler. Use the screws and

nuts provided to attach the CD294, ensuring that the rubber o-ring is

located correctly in the o-ring groove to provide sealing.

6. Shipping Kit

The CD294 DataView Shipping Kit includes:

1. CD294 DataView display with data cable

2. Custom CD294 programming cable

3. Compact Disc containing PC294 programming software, CD294 Manual,

SDS511 manual and example software

4. CD294 MountingTemplate

5. 4 x Mounting screws, nuts, metal washers and sealing washers

6. 2 mm silicon o-ring

7. Hardware

SPECIFICATIONS

Physical

Width: 130 mm

Height: 100 mm

Depth: 25 mm

Weight: 150 g

Supply Requirements: 5 VDC (Powered from datalogger)

Power

Current consumption:

Operating: 5.5 mA typical while display is active

Quiescent: <100 μA