User Manual

Model 083E Relative Humidity and Temperature Sensor

3. Initial Inspection

• Upon receipt of the 083E, inspect the packaging and contents for damage.

File damage claims with the shipping company.

• The model number and cable length are printed on a label at the

connection end of the cable. Check this information against the shipping

documents to ensure the expected product and cable length are received.

4. Quickstart

Figure 1-1 shows the 083E installed in a 41003-5 radiation shield. Figures 4-1

and 4-2 show the radiation shield mounted on a crossarm and a mast,

respectively.

4.1 Quick Installation

Review Section 7, Installation for complete instructions. To install the 083E,

you will need:

• 41003-5 Radiation Shield

• 28415 Hex Plug (ships with 083E sensor)

1. Insert the 28415 hex plug that ships with the 083E sensor into the

underside of the 41003-5 base.

2. Attach the radiation shield to the tripod mast, crossarm, or tower leg using

the supplied U-bolt. See Figures 4-1 and 4-2 for examples of shield

mounting.

FIGURE 4-1. 41003-5 radiation shield mounted on a crossarm