Owner's manual

Table of Contents
PDF viewers: These page numbers refer to the printed version of this document. Use the
PDF reader bookmarks tab for links to specific sections.
1. Introduction.................................................................1
2. Cautionary Statements...............................................1
3. Initial Inspection .........................................................1
3.1 Ships With List.....................................................................................2
4. Quickstart ....................................................................2
4.1 Step 1 — Mount the Sensor .................................................................2
4.2 Step 2 — Use SCWin Short Cut to Program Datalogger and
Generate Wiring Diagram.................................................................5
5. Overview......................................................................7
6. Specifications .............................................................8
6.1 Wind Speed (Anemometer)..................................................................8
6.2 Wind Direction (Vane).........................................................................9
6.3 Wind Sentry Assembly ........................................................................9
7. Installation...................................................................9
7.1 Siting ....................................................................................................9
7.2 Assembly and Mounting ....................................................................10
7.2.1 03002 Wind Sentry Set ...............................................................10
7.2.2 03101 Anemometer.....................................................................10
7.2.3 03301 Vane .................................................................................11
7.3 Wiring ................................................................................................11
7.4 Programming......................................................................................13
7.4.1 Wind Speed.................................................................................13
7.4.2 Wind Direction............................................................................13
7.4.3 Wind Vector Processing Instruction ...........................................14
7.4.4 Example Programs ......................................................................14
7.4.4.1 CR1000 Program..............................................................15
7.4.4.2 CR10X Program ...............................................................15
7.4.5 Long Lead Lengths .....................................................................17
8. Sensor Maintenance.................................................17
i