Manual

R.M. Young Wind Sentry
the datalogger has been programmed to measure wind direction as described in
Appendix A.
Route the sensor cable along the underside of the crossarm to the tower/tripod
mast, and to the instrument enclosure. Secure the sensor cable to the crossarm
and mast using cable ties.
CM220
CM200 Series Crossarm
FIGURE 3-1. 03001 Mounted to CM200 Series Crossarm with CM220
PN 1049 Nu-Rail
CM200 Series Crossarm
FIGURE 3-2. 03001 Mounted to 019ALU or CM200 Series Crossarm
with PN 1049
4