Measurement and Control Module Operators Manual

SECTION 11. OUTPUT PROCESSING INSTRUCTIONS
11-6
PARAM. DATA
NUMBER TYPE DESCRIPTION
01: 2 Repetitions
02: 4 Number of bins
03: 2 Form code (0=open form,
1=closed form)
04: 4 Bin select value input
location no.
05: 4 Weighted value input
location no. (0 =
frequency distribution
option)
06: FP Lower limit of range
07: FP Upper limit of range
Outputs Generated: Number of Bins * Repetitions
*** 77 RECORD REAL TIME ***
FUNCTION
This Instruction stores the current time in Final
Storage. At midnight the clock rolls over from
23:59 to 00:00. The day also changes.
If hourly or daily summary data is output, it may
be desirable to have the previous day output,
since that is when the measurements were
made. Entering a 2 for the day code causes
the previous day to be output if it is the first
minute of the day. Similarly, entering 2 for the
hour-minute code causes 2400 instead of 0000
to be output (the next minute is still 0001).
When day and hour-minute are both output, a 2
for either code results in the previous day at
2400.
The year is output as 19xx if xx is greater than
85, otherwise it will be output as 20xx. The
CR10 will require a PROM update in the year
2085. If year is output along with a 2 option in
day or hour-minute, the previous year will be
output during the first minute of the new year.
PARAM. DATA
NUMBER TYPE DESCRIPTION
01: 4 Enter appropriate TIME
option code
Outputs Generated: 1 for each time
parameter selected