MSDS

Revised: 03/04/15 SLIPKOTE Air Tool Oil 150 Page 7 of 7
* “Yes” indicates that all components of this product comply with the inventory requirements administered by the governing
country(s).
“No” indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by
the governing country(s).
SECTION 16: OTHER INFORMATION
HAZARDOUS MATERIAL INFORMATION SYSTEM (U.S.A.)
Health: 1
Flammability: 1
Reactivity: 0
NATIONAL FIRE PROTECTION ASSOCIATION (U.S.A.)
Health: 0
Flammability: 1
Reactivity: 0
(0-Least, 1-Slight, 2-Moderate, 3-High, 4-Extreme, PPE-Personal Protection Equipment Index recommendation, *- Chronic Effect
Indication). These values are obtained using the guidelines or published evaluations prepared by the National Fire Protection Association
(NFPA) or the National Paint and Coating Association (for HMIS ratings).
HISTORY
DATE ISSUE (MM/DD/YYYY):
03/04/2015
KEY TO ABBREVIATIONS:
ATE = Acute Toxicity Estimate
BCF = Bio-concentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals
IATA = International Air Transport Association
IBC = Intermediate Bulk Container
IMDG = International Maritime Dangerous Code
LogPow = logarithm of the octanol/water partition coefficient
MARPOL 73/78 = International Convention for the Prevention of Pollution from Ships, 1973 as
modified by the Protocol of 1978. (“Marpol” = marine pollution)
UN = United Nations
NOTICE TO THE READER:
To the best of our knowledge, the information contained herein is accurate. However, neither the above-named supplier, nor any
of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards
and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only
hazards that exist.