Operation Manual

PICTURE
BRIGHTNESS
CONTRAST
H POSITION
V POSITION
PHASE
PIXEL FREQ.
Adjust the brightness of without affecting VIDEO’s brightness.DSUB ANALOG
①
BRIGHTNESS
Adjust the contrast of without affecting VIDEO’s contrast.DSUB ANALOG
② CONTRAST
Adjust the horizontal position of the image.
③ H POSITION
Adjust the vertical position of the image.
④ V POSITION
Remove the noises. When phase value is wrong, the image has vertical lines especially in 1 dot on and off.
⑤ PHASE
Adjust the sampling frequency of DSUB analog signal.
⑥ PIXEL FREQ.
※Press MENU button to go to the Main menu.
MENU
75
50
RED
GREEN
BLUE
The tone of color can be changed from red-dish white to bluish white.
The individual color components are also user customizable.
COLOR
① 9300K Change color temperature : Red 42 Green 52 Blue 50
②7300K Change color temperature : Red 51 Green 46 Blue 46
③6500K
Change color temperature : Red 40 Green 54 Blue 54
④USER User customizable. (RED, GREEN, BLUE)
※Press MENU button to go to the Main menu.
MENU
USER
※With VOL▶, go to SUB MENU. After adjusting in SUB MENU,
press MENU to exit.
※With VOL▶, go to SUB MENU. After adjusting in SUB MENU,
press MENU to exit.
20
21
DSUB ANALOG(PC)
The audio input level should be met with the specification
because of the audio distortion.
100
50
0