INSTRUCTION MANUAL 17” DIGITAL TFT LCD COLOR MONITOR CM-1710D/TM-1710D (Option) Thank you for choosing this product. Please read this instruction manual carefully before operating this product.
1. Safety Rules Contents 1. Safety Rules 3 2. Before Use 8 Please read the “Safety Rules” carefully before using this product. Following of the safety rules prevents users from any damage related with the misuse of this product. It is very important that users follow these safety rules. We state “Caution” and “Warning” to clarify any potential for damage associated with misuse of the product. Warning 3. Special Features of the product 10 4. Terms of part 11 5. Remote Control 12 6.
Do not use in bathtub. Do not pull the plug with wet hands. ---This may cause electric shock. Do not use unapproved power voltage. ---This may cause fire or electric shock. Caution Do not use unapproved Cigarette Lighter Adapter. --- This may cause fire ,electric shock and/or malfunction. Do not put the product in a place where sudden temperature increase occurs such as the vehicle’s dashboard. Do not damage or bend electric cord. Do not place heavy objects on electric cord.
Unplug the product and remove cords when moving. --- It may damage cords and cause fire and/or electric shock. The car engine should be running when you use the product in a car. ---Without the engine running, you may have excessive discharge of the car battery. Do not pull the cord line when you unplug it. ---Damaged cords may cause fire and/or electric shock.
2. Before Use Precautions (when you use the product in a car) =To safely use the product, please read the user’s manual carefully before use. =Connect all lines as directed in the product connection map in the manual. =Do not touch the LCD panel. =Use the product at the temperature range of 0OC ~ 50OC . =Screen may be a little dark when the product is operated in low temperature areas. Screen will be shown normal luminosity after a few minutes.
3. Special Features of the Product 4.
5. Remote Control ① ③ TV/AV POWER ② ④ ⑥ ⑤ CH RECALL SLEEP ⑧ MENU ⑦ VOL AUTO PIC CH PICTURE SETUP ⑩ SOUND ⑫ ⑪ 1 2 3 4 5 6 7 8 9 ⑬ 0 A.MEMO. ⑭ 12 Power ON/OFF Key ⑫ SOUND Sound selection button ② TV/AV Select TV, external video, s-video, DVI, D-sub analog ⑬ 0~9KEY Changes CHANNEL by selecting numbers directly (only TM-1710D) ③ RECALL Displays present status and volume level ⑭ A.MEMO.
6. Functions ※( ), it means a remote control button. 3 MENU (MENU) 1 POWER (POWER) AV/ S-VIDEO =POWER ON/OFF KEY ① Push POWER(POWER) button. POWER is on. PICTURE(PICTURE) ② Push POWER (POWER) button again. POWER is OFF. 2 SELECT(TV/AV) =It is function to change external video signals to DSUB ANALOG/ DVI/ VIDEO/ S-VIDEO/ TV DSUB ANALOG/ DVI DIGITAL/ AV/ S-VIDEO/ TV 55 CONTRAST 40 SHARPNESS 14 ※ With VOL ▶, go to SUB MENU. After adjusting in SUB MENU, press MENU to exit.
SETUP(SETUP) SOUND(SOUND) ▶ ENGLISH LANGUAGE OSD TIME 10 TRANSLUCENT 14 ※ With VOL ▶, go to SUB MENU. After adjusting in SUB MENU, press MENU to exit. MUTE OSD H POS. OSD V POS. FACTORY RESET VOLUME 10 TREBLE 50 BASS 50 OFF ① LANGUAGE Change language English, France, German , Spanish , Italian, Japanese, Korean. ① MUTE Mute the sound temporarily. Mute is released when you change channel and adjust volume.
TV Mode (only TM-1710D) CH PICTURE(PICTURE) TV ※ With VOL ▶, go to SUB MENU. After adjusting in SUB MENU, press MENU to exit. TYPE CHANNEL ① BRIGHTNESS Adjust the brightness of video. ② CONTRAST Adjust the contrast of video. ③ SHARPNESS Adjust the sharpness of video. COLOR TINT ④ COLOR TINT Change the richness of color. COLOR TONE ⑤ COLOR TONE Change the tone of color.
PC (ANALOG) COLOR PICTURE BRIGHTNESS 75 ※ With VOL ▶, go to SUB MENU. After adjusting in SUB MENU, press MENU to exit. The tone of color can be changed from red-dish white to bluish white. The individual color components are also user customizable. CONTRAST H POSITION USER 50 ※ With VOL ▶, go to SUB MENU. After adjusting in SUB MENU, press MENU to exit. V POSITION PHASE PIXEL FREQ. RED 14 GREEN 100 BLUE 20 ① BRIGHTNESS Adjust the brightness of video without affecting RGB s brightness.
DISPLAY MODES PC (DVI) For the display modes listed below, the screen image has been optimized during manufacture. PICTURE BRIGHTNESS 75 ※ With VOL ▶, go to SUB MENU. After adjusting in SUB MENU, press MENU to exit. Mode CONTRAST H POSITION VGA Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) Pixel Clock Frequency(MHz) Sync Polarity (H/V) 720 x 400 31.469 70.087 28.322 -/+ 640 x 480 31.469 59.940 25.175 -/- 640 x 480 37.500 75.000 31.500 -/- 800 x 600 37.880 60.
4 RECALL Displays present status and volume level. 5 AUTO PIC TV channel scan and memory. 6 SLEEP Sleep timer(0/10/20/30/60/90/120) 7 TV/CATV Select TV, external video, s-video, DVI, D-sub analog. 10 OSD MESSAGE OUT OF RANGE NO SIGNAL 8 MUTE ① The screen shows this when signal is out of range. ② The screen shows this when there is no signal. It is a function of Mute control. When you push MUTE button, OSD display this image. This image can be toggle. 9 CH.
7.
8. Changing Remote Control Battery 9. Specifications CM-1710D/TM-1710D 1. Slide and open the battery cover. SPECIFICATION ITEM LCD PANEL SIZE 43.18cm (17.0 INCH) MAKER SAMSUNG(LTM170EU-L11 & L21) NUMBER OF PIXELS 1280 X 1024 0.264(H) X 0.264(V)mm PIXEL PITCH 2. Insert new batteries and ensure that the polarities are correct when inserting. BRIGHTNESS 300cd/㎡ CONTRAST RATIO 500 : 1 VIEW ANGLE CR≥5 75˚ / 75˚ / 75˚ / 60˚(L/R/U/D) DISPLAY COLOR 16.2M VIDEO DIGITAL SIGNAL (DVI) ANALOG R.G.
MEMO SPECIFICATION ITEM POWER, MENU, SELECT, ▼▲, ◀▶ S/BY LED, REMOTE SENSOR WINDOW USER CONTROLS OSD DISPLAY LANGUAGES POWER SUPPLY VOLTAGE CONSUMPTION 7 LANGUAGES DC 12V 36WATT SOUND SIGNAL DIMENSION ( W X H X D ) OPERATING TEMPERATURE STORAGE TEMPERATURE WEIGHT 2WATT STEREO 422(W) X 371(H) X 38.5(D)mm 0 oC~ + 50 oC o o -20 C~ + 60 C 4.
