Operation Manual

13
MUTE
9
• It is a function of Mute control. When you push MUTE but-
ton, OSD displays this icon. Push MUTE again to get back the
previous sound level.
OUT OF RANGE
1) The screen shows this when signal is out of range.
2) The screen shows this when there is no signal.
3) The screen shows this when the signal cable is not
connected.
NO SIGNAL
CHECK CABLE
CH.SET (Refer to DVB-T manual)
10
EX) When the memorized board PR2 moves PR4, press CH.SET button, number4 and then
MENU button.
PR PR 4
OSD MESSAGE
11