User's Manual

OPERATION OPERATION
This Headset is operated particularly CHs with POWER ON/OFF as below.
When POWER ON, press the preferred CH's KEY for 3 sec. then be POWER ON.
Press again for 3 sec. then be POWER OFF.
(Details contents : 9 page KEY operating Time and Beep operating state)
Press (+)KEY or (-)KEY to control volume while operates.
Should register Headset to Bluetooth device(ex. Cellular phone) to use Headset.
Registration is process connecting via certification that is encrypted between two devices
that Bluetooth function is.
∙ Select "MOTOSONIC-700BH" in searched device list.
∙ Should connect to Bluetooth device that register to connect
(or, after connection cancellation) Headset after registration.
1) Press (-)KEY on the CH1 headset for 7 seconds while the power is off.(Pairing mode)
2) Refer to the instruction manual of cellular phone and then connect Headset after
searching and registration.
1. Connecting Headset with cellular phone
1) Press (-)KEY on the CH1 headset for 7 seconds while the power is off.(Pairing mode)
2) Refer to the instruction manual of Audio device and then connect Headset after
searching and registration.
1) For one headset, press (+)KEY for 7 seconds while the power is off to set as a slave
mode.(Slave mode setting)
2) For other headset, press (M)KEY + (+)KEY for 7 seconds while the power is off to set
as a master mode.(Master mode setting)
∙ Connect with CH1 of Headset when use to connect Headset with Bluetooth device.
(ex. Cellular phone)
∙ Connect with CH2 of Headset when use to connect Headset with Headset.
(this CH2 of Headset does not available to connect with other Bluetooth devices)
∙ When connect with a preferred device, at first POWER OFF the connected Bluetooth.
(When Headset is already connected with other device it does not operate Pairing Mode)
∙ Once connected device is connected automatically when POWER ON.
(-) KEY
∙ Power ON : Press for 3 sec.
∙ Power OFF : Press for 3 sec.
(+) KEY
∙ Power ON : Press for 3 sec.
∙ Power OFF : Press for 3 sec.
CH 1
CH 2
–––
–––
2. Connecting Headset with Audio Device
3. Connecting Headset with Headset : between CH2 and CH2
Volume control is available in operation state.
Remark : The volume lever for the conversation between CH2 is fixed,
therefore volume is not adjustable.
∙ In order to disconnect the audio device, uncheck the bluetooth option on
the audio device. Turn off the headset power and it will be automatically
connected when the power is back on.
• Headset POWER ON/OFF
• Volume UP/DOWN
• Headset registration and connection method
∙ Refer to the Instruction manual of cellular phone to replay music files that
is built-in to cellular phone and to listen to music.
∙ In order to disconnect the cellular phone, uncheck the bluetooth option
on the cellular phone. Turn the headset power and bluetooth will be
automatically connected with audio device when the power is back one.
12 13