User's Manual

Please read the “Safety Rules” carefully before using this product. Following of the safety
rules prevents users from any damage related with the misuse of this product. It is very
important that users follow these safety rules. We state “Caution” and “Warning” to clarify
any potential for damage associated with misuse of the product.
May cause bodily harm or even
death if users ignore warnings
in the safety rules.
Warning
About signs
“Precautions”
“Do Not”
“Follow Directions Carefully”
SAFETY RULES
May cause bodily harm or even
death if users ignore cautions
in the safety rules.
Caution
Place the product where it doesn’t prevent the driver from driving.
- The driver’s view of sight should not be blocked.
Do not use unapproved power voltage.
- This may cause fire or electric shock.
Do not use in bathtub. Do not pull the plug with wet hands.
- This may cause electric shock.
Do not get product wet and operate with wet hands.
- This may cause electric shock.
Do not use damaged electric cord.
- This may cause fire and(or) electric shock.
Be careful when thunder and lightening occurs.
- There is a danger of electric shock.
Do not attempt to open, disassemble or repair the product by any person
except an authorized service dealer.
- This may cause electric shock and(or) malfunction. You should request
an authorized service dealer for any inspection and repair of the product.
Do not put pins or needles into the product or electric cord of product.
- If this happens, stop the product operation immediately. Continuous
use may cause fire, electric shock and(or) malfunction.
Do not get product wet and operate with wet hands.
- This may cause electric shock.
SAFETY RULES
Stop using the product immediately when you drop it or damage the
outside shell.
- Continuous use may cause fire, electric shock and(or) malfunction.
Warning
Caution
Do not put the product in place where sudden temperature
increase occurs such as the vehicle’s dashboard.
If you find any strange occurrences or malfunction in the product
or any foreign substance gets into the product, please contact the
authorized retailer where you purchased the product.
 Do not use the product in the following locations.
 In direct rays of the sun and near heating products
 High in humidity and with bad ventilation
 Dusty or oily locations
 Low temperatures
 Unstable environment
- This may cause malfunction.
Keep the product strongly in the helmet.
- It may cause to separate from the helmet.
Clean the product often.
- Dust in the area may cause fire.
Do not place elctric cord near a heating product.
- The cord surface may melt and cause fire and(or) electric shock.
Unplug the product and remove cords when moving.
- It may damage cords and cause fire and(or) electric shock.
Do not pul the cord line when you unplug it.
- Damaged cords may cause fire and(or) electric shock.
Unplug the product when you don’t use it for a long time.
- Damaged cords may cause fire and(or) electric shock.
Do not place the product where high temperature and(or) the direct ray
of the sun occurs.
- This may cause fire, electric shock and(or) mal ion.funct
Do not put the product in an unstable place where the product may be
exposed to shock and(or) impact.
- The product may fall and be damaged.
Keep electric cord properly positioned.
- An improperly positioned electric cord may cause fire or electric shock
when metal material is in contact with power source.
6 7