Instruction manual CA-33 Heavy Duty Camera Features • 1/3“ CCD imag sensor • 6 IR-LEDs for night view • Type of protection IP69K • Integrates heating • Aluminium die-casting housing
Connection Tape Camera Monitor Extension cable 1. Determine a position and a direction of installation so that the rear view can be effectively seen on the monitor screen. 2. Fix the camera bracket to the vehicle using the provided adhesive tape and tapping screws with spring washers. 3. Fix the camera between the camera bracket and sun visor using machine screws, and adjust the angle of camera and fasten the screws firmly. 4. Run the cable from the monitor to the camera.