CM-708R 7” TFT LCD COLOR MONITOR 7 VEHICLE 7” TFT LCD LANGUAGE INSTRUCTION MANUAL Thank you for purchasing this product. For proper usages and application, please read this instruction manual thoroughly. PRINTED IN KOREA ver. 1.
CONTENTS SAFEGUARD INSTRUCTIONS -------------------------------------- 3 FEATURE ----------------------------------------------------------------- 5 BOX CONTENTS ------------------------------------------------------- 5 FUNCTION OF EACH PART ---------------------------------------- 6 FUNCTIONS ------------------------------------------------------------- 8 CHANGING REMOTE CONTROL BATTERY -------------------- 12 CONNECTIONS ------------------------------------------------------- 13 INSTALLATION ------------
SAFEGUARD INSTRUCTIONS 7” TFT LCD COLOR MONITOR Please read the “Safety Rules” carefully before using this product. Following the safety rules prevents users from damages related with the misuse of the product. It is very important to follow these safety rules. We state “Caution” and “Warning” to clarify any potential risk for a damage associated with the misuse of the product. CAUTION WARNING This information is for preventing damage or shorten the life time of the products.
WARNING Do not put the product in place where sudden temperature increasing and should use on optimum voltage, temperature and humidity --- It may cause to electronic shock or malfunction. Do not get product wet and operate with wet hands. --- It may cause to electronic shock or malfunction. Do not place where interfere with visual field and watch or operate monitor during driving. --- It may cause traffic accident. Keep clean dust on power socket.
1 FEATURE 7” TFT LCD COLOR MONITOR • 8bit MICRO controller • TFT LCD with high resolution and low reflection • All functions are displayed on screen (OSD function) • PWM volume control • Mode selection function • Low energy consuming rate • Language Display Selection (KOR-JPN-GER-ENG-SPA-FRE-ITA) • 4 Screen Mode (FULL-WIDE-NORMAL-CINEMA) • Free voltage (From DC 12V to DC 24V) • Dimmer selection function 2 BOX CONTENTS 7” TFT LCD COLOR MONITOR Monitor Stand Monitor Cable Cigar Cable Manual Remote Co
3 FUNCTION OF EACH PART 7” TFT LCD COLOR MONITOR [ MONITOR ] 6 ① S/BY LED Power or Stand-by status display ② POWER Power ON/OFF button ③ MODE CAM1/CAM2/AV selection function ④ MENU SETUP/PICTURE selection function ⑤ UP/DOWN SOUND/MENU level control
[ REMOTE CONTROLLER ] ① POWER Power ON/OFF button ② MODE Selecting CAM1/CAM2/AV ③ MENU Selecting MENU and changing functions ④ VOL ◀▶(VOL+-) Changing volume or MENU level ⑤ CH ▲▼ Moving Up/Down on MENU ⑥ MUTE Mute mode On/Off ⑦ RECALL Displaying the current channel and volume level ⑧ AUTO PIC Adjusting the screen setting 7
4 FUNCTIONS 7” TFT LCD COLOR MONITOR 1 POWER ON OFF 1) Press [POWER] button to the power. (STAND BY state is OFF) 2) Press [POWER] button again to off the power. (STAND BY state is ON) 2 MODE • It is a function to change video signal. CAM1 1) Press [MODE] button. 2) CAM1/CAM2/AV appears on the screen and it is disappearing 5 seconds after setting. CAM1 CAM2 AV 3 UP/DOWN • Press VOL◀▶(VOL+/-) button on remote control or UP/DOWN button on monitor to adjust volume.
4 MENU • It is a function to select MAIN MENU (SETUP/PICTURE/CAMERA) 1) Press [MENU] button to select MAIN MENU, changed color in red when it is selected. SETUP PICTURE CAMERA 2) Press [MODE] button to select SUB MENU, UP/DOWN button to change SUB MENU. DIMMER LANGUAGE DIRECTION DISPLAY MARKER RESET CONTRAST BRIGHTNESS COLOR TINT ENGLISH 0˚ FULL OFF ▶ 70 70 50 50 [ 1.
• DISPLAY WIDE NORMAL CINEMA FULL • MARKER Warning - The onscreen distance markers should be considered as a general reference to assist the driver in assessing the distances depicted on the screen. The distance markers have been designed based on the CCD camera installation conditions listed in the next section, but differences in vehicle design and construction may result in the actual installation condition or location being different from the conditions listed.
(1) Press MENU button and select MARKER ADJUST menu. (2) Press MODE button and select H / V. (H: horizontal / V: vertical ) (3) Press [DOWN/UP] button on the monitor or [◀▶] button on the remote control, and switch marker pattern. (H = -10~+10, V= -12~+12, Default setting: H=0, V=0) (4) After 10 seconds, set up screen disappears, and set up finishes. * If there is no button operation, set up screen disappears even during set up process.
[ 2. PICTURE USER ] 1) [MODE] button to select CONTRAST, BRIGHTNESS, COLOR, TINT MENU. (Selected menu in red) 2) Push [UP/DOWN] button to change the settings of the diferent menu points. CONTRAST BRIGHTNESS COLOR TINT 50 50 50 50 CONTRAST BRIGHTNESS COLOR TINT 50 50 50 50 CONTRAST BRIGHTNESS COLOR TINT 50 50 50 50 CONTRAST BRIGHTNESS COLOR TINT 50 50 50 50 [ 3. CAMERA ] 1) Press the mode button to choose CAM1; CAM2 will turn red. CAM1 MIRROR 2) Press the VOLUME UP, DOWN button.
5 AUTOPIC • When press the AUTO PIC button, PICTURE SETUP menu is displayed on screen. CONTRAST BRIGHTNESS COLOR TINT 50 50 50 50 6 MUTE • This function can be operated by the remote control. 1) Press [MUTE] button to mute sound and display mute icon. 7 RECALL CAM1 VOLUME 30 1) Press [RECALL] button to check the MODE and Volume.
5 CHANGING REMOTE CONTROL BATTERY 7” TFT LCD COLOR MONITOR 1. Pull the battery cover to the direction of the arrow. 2. Place a battery with the (+) sign upward. (No. CR2025) 3. Put the battery case back into the remote control in the direction of the arrow.
DC INPUT AUDIO VIDEO GREEN(CAMERA2) BLACK(CAMERA1) BLACK (CAMERA 1, Priority) FOR REAR VIEW Connect this line to “+” of reverse light lamp. GREEN (CAMERA 2) FOR SIDE VIEW Connect this line to “+” of side light lamp.
7 INSTALLATION 7” TFT LCD COLOR MONITOR (1) Please set the place for Monitor installation. Clean the place where to install stand and install stand firmly after removing protect tape of stand bottom. (2) Fix the stand with enclosed screws. (3) Assemble the monitor to stand and fix it in the right angle. (4) Connect cable as follows.
8 SPECIFICATION 7” TFT LCD COLOR MONITOR SPECIFICATION ITEM LCD PANEL POWER SUPPLY INPUT SYSTEM FREQUENCY VIDEO INPUT SIGNAL NTSC 17.78 cm (7.0 inch) DISPLAY FOMAT 800(H) x 3(RGB) x 480(V) BRIGHTNESS 400 cd/m2 Contrast ratio 500:1 ACTIVE AREA 154.08 (W) x 86.92 (H) mm VIEW ANGLE 70˚(L) / 70˚(R) / 50˚(U) / 70˚(D) VOLTAGE DC 12V - 24V CONSUMPTION 450mA Max (DC 12V, Monitor Set Only) AUTO (NTSC/PAL) HORIZONTAL 15.734 Khz 15.
MEMO
MEMO
INSTRUCTION MANUAL
