Manual (Download – CamOneTec.com) Version: 1.
turn on video & images Content of the Box Please check the completeness before using the product.
turn on video & images Index Content of the Box 2 Preparation 4 Insert/replace Battery 4 Charging the Battery 4 Functional Diagram 5 Main Functions 6 Compatible Memory Cards 7 Inserting/Removing the micro SD Card 7 Switching on the Camera 7 Icons (Camera Status) 8 Setup Menu 8 Using the DiveBox and different Mounts 10 Photo / Video Recording 11 Underwater Recordings 11 Video Timelapse 11 Photo Interval 12 Photo Serial Recording 12 Zoom 12 Playback of Videos and Photos 1
turn on video & images Preparation Compensation for recorded content CamOne Tec will not be responsible in any case for any consequential or direct problems that will lead to a loss of recorded or edited data. Furthermore, CamOne Tec will not guarantee the content in case the recording or saving is not working properly. The above limitations are also valid in case the unit has been repaired. Do not remove the micro SD Card while recording or saving.
turn on video & images Functional Diagram The USB comport has the following setup: »» AV-Out »» 5V IN »» Data input »» Signal IN Key Panel Battery cover Lens Port Cover Microphone Status LEDs Front LED Screen OCB-Contacts Wifi/2,4 GHz Module Tripod thread Due to limitations in the technology of the display production, single or few dark or light dots might appear.
turn on video & images Main Functions !! The buttons of the CamOne infinity are multifunctional On/Off Light button Menu button Switching through 3 submenus Play button Photo button Video button Replay Photo function Video function Switching through submenus Switching through submenus Switching through submenus Confirming chosen options Zoom In Zoom Out Micro SD Card slot 2 Micro SD Card slot 1 HDMI Port 10-Pin Port Mini USB 2.
turn on video & images Compatible Memory Cards Only use Micro-SDHC-Cards ranked "Class4" or higher. The camera can be used with cards up to 32 GB. The recommended cards are "FCO Rapid Rush" cards at a minimum size of 8 GB. Using a 32 GB card allows a recording time of 4,5 hours at highest resolution. Capacity Art. Nr. 8 GB FC3008 16 GB FCHD16 32 GB FCHD32 Inserting/Removing the micro SD Card »» Remove the comport cover protecting the sockets and the card slot.
turn on video & images Icons (Camera Status) According to the configurations, different icons will appear on the display: Video/Photo recording Duration Timestamp System time Memory cards Battery status Photo/Video Remaining capacity The Timestamp is available in Photo and Video mode. The card slot in use is indicated by a blinking icon. An empty slot is indicated by the symbol of a crossed out card.
turn on video & images Setup Menu Please press the M-Button for 3 seconds to enter the setup. The menu is divided into 3 categories that can be selected by the different tabs (Photo, Video and System settings). By pressing the M-Button you will enter the next tab. To exit the menu, press the M-Button for several seconds. Photo-Menu Here you can select all necessary settings for photo recordings.
turn on video & images System Settings Here you can perform the main settings. Languages: Choose between German, English, French, Spanish, Italian, Dutch, Norwegian or Russian Date: Year-Month-Day. Switch through menu using the M-Button Time: Hour:Minute. Switch through menu using the M-Button Auto Screen Off: Screen will be switched off to save battery: Off, 30, 60 or 120 Sec. Auto Power Off: Select the Auto off function: Off, 60 Sec., 120 Sec. or 300 Sec.
turn on video & images Photo / Video Recording Right after switching on the Cam it is possible to take pictures or videos by pressing the "record" button. Press the button again to stop the recording. !!Never remove the SD-card or the battery whilst the cam is saving data. (indicated by a rotating circle on the display).
turn on video & images Photo Interval »» Press the "M-Button" to enter the Setup Menu »» Choose the photo menu and then "Photo Interval". You can choose between: Off, 3 or 5 photos. »» Confirm the requested function »» Leave the menu. By pressing the record button the camera will release the intervals. The photos will be saved on the card in JPEG. Photo Serial Recording »» Press the "M-Button" to enter the Setup Menu. »» Choose the photo menu and then "Serial Picture".
turn on video & images Connect the camera to your TV by using an HDMI Cable or the supplied USB-AV Cable and switch to the corresponding channel. Enter the Playback Mode on the camera to watch your videos. The icons (camera status) can be switched off by entering the OSD- option in the menu. Copy/Transfer Video Files (MS Windows) The videos can be watched easily on your PC. We recommend the free VLC- Player. It can be downloaded on vlc-player.
turn on video & images Using external Modules With the supplied Ten2Ten Adaptor you can easily connect the camera with many accessories of the FlyCamOne HD family. Make sure to always Plug in the adaptor to the USB plug of the cam and connect the accessories. Following accessories are compatible with the CamOne infinity: Picture Functions Art. No. GPS Module Indication of several GPS- data and G- forces. FCHD15 2,5” (63,5 mm) external Screen Cable-connected video picture on separate screen e.g.
turn on video & images LinX Digital Video-System 2,4 GHz In connection with the LinX Digital Video System you are able to control the camera and watch the picture in a distance of up to 300 m. COIN10 Wifi-Module The Wifi-Module enables you to control the CamOne infinity completely with a smartphone. The live picture is showing on the phone display. By using your own access point the module is working in the nature as well.
turn on video & images Technical Data Operating Voltage: 5 V (USB) / 3,7 V (LiPo-Battery, 800 mAh) Consumption: 250 – 450 mAh (depending on camera settings) Size: 49 x 42 x 34 mm Weight: 77 g, incl. battery Battery: 3,7 V 800 mAh LiPo Format: MPEG4 or MOV Sensor: CMOS, 5 MPix Lens (exchangeable): 170° > 720p Zoom: Digital 4times (only NTSC) Screen: 1,5" (38 mm) TFT 127° > 1080p Microphone: Mono, 48 kHz (built-in) Ports: 10 Pin Mini USB 2.
turn on video & images FAQ Error The camera switches itself off Reason The battery is not charged. after start. Solution Charge the camera with USB for at least 3 hours. Unable to switch ON the The battery is not inserted camera. correctly. Check the contacts. The battery is defective. Replace the battery. The video is flipped by 180°. Wrong menu setting. Change menu setting. Date and Time are not Wrong menu setting. Change date and time in the setup.
turn on video & images Accessories Art.-Nr.
turn on video & images Safety Advice Before you start using the camera please read the manual and safety advices carefully. WARNING Li-Po BATTERY !! Mishandling the battery may cause an explosion, fire and smoke including damage of health or goods. It will also reduce battery performance. Never charge a damaged Li-Po battery pack. Stop charging if the Li-Po battery pack is deformed (blown up).
turn on video & images CamOneTec.
