Operation Manual

21
How to update firmware
 Please follow the below process in case of updating rmware
1. Remove SD card from the unit.
● Turn off the ignition rst and remove cigar jack cable from the unit.
2. Access Download of our webpage(www.blacksys.co.kr/en) and download the latest update le.
3. Connect SD card to PC and paste downloaded latest update le(UPDATE.BIN) to the UPDATE folder of removable
disk.
4. Insert SD card which contains latest update le to the unit.
● Turn on the ignition and connect cigar jack cable to the unit.
5. All LEDs are on and upgrade gets started and once upgrade is completed, buzzer beeps twice and rebooting goes
on automatically.
● Do not disconnect power cable while update is in process. It can cause malfunctioning.
How to download Software
1. Access Download of our webpage(www.blacksys.co.kr/en) and download the latest software le.
2. Install the software to the PC.
How to update rmware