Operation Manual
12
Installation
1. Attaching double-sided adhesive tape
Wipe up the foreign matters or moisture completely from
the location of installation. Remove the release paper in
double sided tape and attach it to the holder and remove
the red adhesive protector.
2. Installing unit
Installation is recommended on the left/right of room mirror.
Tightly fasten the adhesive of holder to the windshield by
pushing it. Adjust the angle of camera to record forward
and unit to be vertically installed. Finally, tighten the
clamping lever.
Caution
Ú If a video from navigation system or dashboard reect in wind-
shield, it can affect video quality. so avoid it.
Installation