User’s Manual
Notice This product helps you to use the recorded video as a reference in case of car accident. The recorded video by this product carries no legal binding force. CammSys will not be responsible for any legal conflict and damage caused by recorded or non-recorded video. ff For the safety, do not operate the product during driving or stare at the product. Such action may result a car accident.
Caution Before use the product, check if operation and video recording goes well. Installation and Management ff Keep clean the camera lens by preventing dust or foreign substance from getting in the lens part. Otherwise, it may result in video distortion. If another object is placed around, it can be reflected from the window. So do not put another object around the installed product.
SD Card Use Be sure to turn OFF the power and LED is OFF before removing or inserting the SD card. Removing the SD card while product is in use, it can cause malfunctioning. ff Use the authorized SD card which a manufacturer/ distributor provided. If authorized SD card is not used, it can cause malfunctioning and loss of recorded Data. ff Do not disassemble or remodel this product. It can cause malfunctioning and service is not available. ff SD card is expendable supply.
How to format PC format Check the virus and format the SD card in a regular basis (twice a month at least ) to avoid disadvantage caused by storage error such as non-recording and abnormal recording. Manual format Manual format is available without PC. How to format 1. Turn off the power. 2. Press Event [▲] button deeply and turn on the power 1. Insert or connect SD card to PC. simultaneously. 2. Click [Start] ➝ [My Computer]. is started after 5 sec. with buzzer sound and 3.
Table of contents Notice 2 Caution 3 Installation 12 LED and Buzzer 14 Installation and Management 3 SD Card Use 4 Power 4 Function 14 Error 15 How to format 5 PC format 5 Manual format 5 Details on Video Record 7 Main features 8 Name of the components 9 Main components 9 Optional components 9 Front 10 Rear 10 Left Side 11 Right Side 11 6 Table of contents PC Viewer Installation 16 How to install PC Viewer 16 How to uninstall PC Viewer 17
Details on Video Record Normal Recording Last Scene Recording Video Record starts when vehicle power is turned on and recorded data are stored in SD card(“REC” folder). Though power supply is disconnected caused by accident or manually, last scene is recorded and stored in EVENT folder by using built-in super capacity battery. Parking Mode Recording ff 10 minutes after parking or stopping the car, if no motion is detected, it converts to Parking mode recording automatically.
Main features Icon Features Features The feature providing clear images under back light circumstances Parking mode recording (In case of being powered) Wide angle of view(120°) makes seamless recording(30fps) LED Indicator for surveillance Event recording starts when impact happen and records 10 sec. before and after impact Video review by connecting to navigation system Built-in Super Capacitor keeps recording for 5 sec.
Name of the components Main components Lock Adepter Main unit User’s manual Cable holder Micro SD Card Cigar jack cable Optional components G P S External GPS module A/V Out cable Name of the components 9
Front Rear Buzzer Camera Lens For video recording Event button For manual recording MIC Voice recording Surveillance LED LED indicator for parking or video recording 10 Name of the components REC, GPS LED LED indicator for error or REC/GPS is running (Refer to page 12~13 regarding LED indicator)
Left Side Right Side Power Terminal For supplying power to the main unit Clamping lever For fixing the holder to the unit and available adjustment on up/ down, left/right side GPS Port Holder For attaching main unit to windshield Check the location and speed of Vehicle through the PC viewer Micro SD Card Slot A/V Out Port Video review by connecting to external device Name of the components 11
Installation 1. Attaching double-sided adhesive tape 2. Installing unit Wipe up the foreign matters or moisture completely from the location of installation. Remove the release paper in double sided tape and attach it to the holder and remove the red adhesive protector. Installation is recommended on the left/right of room mirror. Tightly fasten the adhesive of holder to the windshield by pushing it. Adjust the angle of camera to record forward and unit to be vertically installed.
3. Power cable arrangement and connection 4. Power cable connection and check the LED status By using the cable holders, arrange the Cigar jack cable and connect it to the DC IN port(upper hole). If car navigation system is installed on the car, it is recommended to connect video out cable(option) to navigation system to adjust by checking the current view of the camera. After inserting the Cigar jack cable(Power cable) into cigar jack, turn on the car ignition.
LED and Buzzer Function Mode LED REC GPS Initial Booting Parking Buzzer Beep x2 Event Rec. - Beep Parking Mode - X 14 Update Beep x2 GPS ON X LED and Buzzer Description 1 time beep sound R EC LED ON, Parking LED ON * With GPS Module GPS LED ON, without GPS Module GPS LED OFF 1 time per a sec. beep sound Rear left/right LED 10 times flickers per a sec. (until end of Event) (10 min. after parking) Front LED flickers per 2 sec.
Error Mode LED REC GPS Parking Buzzer Description No SD Card or Recognition error Beep x3 Beep sound per 3 sec. Rear left/right LED OFF Camera Error Beep Beep sound per a sec. Rear left/right LED OFF Manual Format Beep x2 Press Event button and then turn on the unit. Keep pressing Event for 5 sec. then formatting get started automatically. Notice ●● If abnormal status rather than above happen, reconnect power cable to the unit.
PC Viewer Installation How to install PC Viewer 1. Download and execute 2. Click “Agree” of the 3. Prepare component for 4. Start installation wizard 5. Select folder to install 7. Start installation 8. Installation completion Setup.exe and execute 16 PC Viewer Installation contract for Viewer installation 6.
How to uninstall PC Viewer 1. Click the “Start” button. 2. Click the All program and search 4. Select [Yes] when window 5. Uninstallation is in progress. installer ask Uninstall. CW-100Player. 3. Select Uninstall in CW-100Player folder. ÚÚ How to uninstall the PC Viewer Execute C:\Program files (x86)\BlackSys\CW-100 Player\Uninstall.
PC Viewer Layout 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 PC Viewer Installation 17 18 19 20 21 22 23 24 25 26
No. Icon Function No. Icon Function 1 File List Update 14 G-Sensor Data Review 2 Normal Recording File List 15 Enlargement of a part of Screen 3 Event Recording File List 16 Video Screen Capture 4 All Recording File List 17 Select Drive of SD card 5 Screen Minimization 18 Stop Video Playback 6 Full Screen 19 Move to Previous File in the List 7 End 20 Move to 1sec. Before 8 Version Information 21 Playback the Video 9 GPS Speed (Km/h mph) 22 Move to 1sec.
PC Viewer Configuration Voice Recording Parking Mode Time Setting G-Sensor Sensitivity Setting The higher figure, the higher sensitivity to impact.
How to update firmware Please follow the below process in case of updating firmware 1. Remove SD card from the unit. ●● Turn off the ignition first and remove cigar jack cable from the unit. 2. Access Download of our webpage(www.blacksys.co.kr/en) and download the latest update file. 3. Connect SD card to PC and paste downloaded latest update file(UPDATE.BIN) to the UPDATE folder of removable disk. 4. Insert SD card which contains latest update file to the unit.
Technical Specification Model Name Lens Camera Angle of View Sensitivity Video Encoding Resolution Recording Mode CW-100 350K pixels (WDR CMOS Image) 120° 1.0 LUX MPEG4 720x480 pixel NORMAL (80% of memory space, 1min./ file, 30 frame/s) EVENT (20% of memory space, 20sec./ file, 30 frame/s) Option Auto Parking Mode (1min./ file, 30 frame/s) Rec.
Customer Service Type of Damage Type of Service Inquiry Within Warranty After Warranty Period Period Claim a service for a main part within 10 days after purchase Replacement Claim a service for a main part within 1 month after purchase Replacement or Free repair Claim a service for a main part within 1 month after unit exchange Trouble caused Claim a service for faulty unit in a normal use Same defect over 3 times condition Lost by service center during repair service Damaged unit from distributio
Before applying for Service We don’t take any responsibility for the data loss during the service. Please back up the date before applying for service. CammSys Customer Service 6F Daeil B/D, 681-17, Yeoksam-dong, Gangnam-gu, Seoul, 135-081 Korea Customer Service Tel : +82 70 4680 2599 Email : service@cammsys.net If you come to customer service center, service personnel will care for the service timely and properly. For further information regarding customer service, please refer to www.blacksys.co.
Product Warranty Trade Name or Applicant Equipment Name Basic Model Number Certification No. Manufacturer/Country of Origin Data of Manufaturing CammSys Car Black Box CW-100 KCC-REM-SYV-CW-100 CammSys Corp. 2012. 12. 17 Serial Number Date of Purchasing Warranty Period Customer Information Retail Shop 12 months from the purchase date (But, if purchase date is not clear, it can be applying 3 months after manufacturing date) Name Tel. Address Name Tel.
MEMO
MEMO
6F Daeil B/D, 681-17, Yeoksam-dong, Gangnamgu, Seoul, Korea 070-4680-2599 www.cammsys.net www.blacksys.co.
