Operation Manual

33
Firmware Upgrade
LCD Menu03 : Firmware Upgrade
Firmware Upgrade
▶ Upgrade le could be easily downloaded from BlackSys website or BlackSys Exclusive
Viewer. Downloaded upgrade le should be copied into a SD card and then the card
should be inserted to the main body. It can be easily updated through LCD.
▶ After copying an upgrade le into a SD card and inserting the SD to a main body
and clicking the rmware update button, a pop up window of “Upgrade le is being
searched” would appear. If there is no upgrade le in SD card, a pop up window
of “No le” would appear. If there is a pop up window of no upgrade le found,
please check whether there is an upgrade le in a SD card or the upgrade le name
is correct.
▶ If an upgrade le is found, a pop up window of “Firmware Update is available.
Continue update??” would appear. If “No” button is clicked, it would go back to
main menu. When “Yes” is clicked, it would be upgraded.
※ Upgrade of an OBD terminal, an optional device, should be executed in the aforementioned sequence.