Operation Manual
25
How to download Firmware and Software
How to update rmware
Firmware update
Please follow the below process in case of updating firmware.
① Remove SD card from the unit.
• Turn off the ignition first and remove cigar jack cable from the unit.
② Access our webpage (www.blacksys.co.kr > Support > Download) and download the latest update file.
③ Connect SD card to PC and paste downloaded latest update file(CF100update.tar) to the root of removable disk.
④ Insert SD card which contains latest update file to the unit.
• Turn on the ignition and connect cigar jack cable to the unit.
⑤ All LEDs are on and upgrade gets started and once upgrade is completed, recording goes on automatically.
• Do not disconnect power cable while update is in process. It can cause malfunctioning.
How to download Firmware and Software
• Access our webpage (www.blacksys.co.kr > Support > Download) and download the latest update file.
• Complete Installation software to the PC.
※ Internet connection is required to download firmware and software.
※ Please check notice before upgrading firmware as firmware upgrade may change some functions of the product.