C A R D V R USER MANUAL Car DVR of the longest memory storage time (3 times longer as compared with others) CAMMSYS
Before Use Thanks you for choosing Car DVR. We provide customer service through our website. From our website, www.blacksys.co.kr/en, you can enjoy various online services and benefits about our products as well as latest information. Product Upgrade & Notice : www.blacksys.co.kr/en> customer support> notice ● ● ● ● ● ● ● All the figures/pictures shown on this manual are for your understanding and they could be different from the actual product.
Before Use ※ For efficient use, please check the following item at least once a week ● ● ● ● ● ● ● For removal of a SD memory card, power must be turned off and then LED must be turned off before the removal of the card. A SD memory card must be formatted once/twice a month. A SD memory card should be changed every 6 month in case of connection to permanent power, and 1 year in case of connection to Cigar Jack (ACC power).
Before Use How to use a SD memory card ● Only a SD card authorized by the manufacturer should be used. Any of issues caused by unauthorized SD cards would not be reimbursed by the manufacturer. ● A SD card is a consumable product, so it should be exchanged regularly. ● Only the authorized SD card of the manufacturer should be purchased. ● A SD card should be formatted at least once or twice a month. ● Before formatting of a SD card, important data must be saved on another device (HDD).
0.CONTENTS Before Use 1. Caution …………………………………………………………… 8 2. Preparation Product Specification ……………………………………………… Product Feature …………………………………………………… Product Component ……………………………………………… Component Name ………………………………………………… 11 12 16 17 3.
0.CONTENTS 3-7 Image Storage Device …………………… 27 3-8 Manual Recording ……………………… 27 3-9 MIC ………………………………………… 28 3-10 Antitheft LED Function ………………… 29 3-11 Firmware Update ……………………… 29 3-12 Memory Storage Period ……………… 30 3-13 How to Use Memory Adapter ………… 30 3-14 Save Folder and File Description ……… 31 3-15 Rear Camera ………………………………32 4. Memory Format Memory Format Sequence …………… 33 5. Exclusive Viewer Program Install Player …………………………… 36 Player Description ……………………… 37 6.
1. Caution Caution for the parking motion detection In case of Normal power connection, a vehicle battery may get discharged if a vehicle is left in negligence for a long period. In case of leaving a vehicle for a long period, start a vehicle or disconnect power cord for a certain time.
1. Caution Do not place a metallic product on top Do not place a metallic product on top of GPS antenna. It may degrade the reception performance. Satellite reception may take some time GPS satellite reception after starting a vehicle would take some time, and the required time would be varied over climate and/or surrounding circumstance. Stop the operation if there is any malfunction Stop the operation if there is any malfunction or abnormal condition.
1. Caution In case of accident or need of recorded images for other necessary, remove the SD card from main unit and save the data in PC There is a risk of losing data by overwritten in case of keeping data in memory. In case of DC Fuse power connection When connect the permanent power, visiting professional shop is required. Cammsys do not have responsibility for any accident caused by disassemble of the product.
2. Before Use- Product Features Camera Lens type Normal 1min Intensity of illumination 0.1 LUX CMOS Image Recording Event 10sec before /after event Angle of view 140° (front) / 120° (rear) Parking 10sec before /after motion detection Pixel HD 2M Pixels Parking Motion detection LED type Blinking upon supplying of power Etc. LCD 2.8” TFT LCD 3.5” TFT LCD / Built-in 3.5” Touch Power DC 12V~24V Recording Compression type H.
2. Before Use- Product Features HD 1280 x 720P Resolution 1280X 720 high resolution encoding / High performance 2 M pixel camera 3.5” TFT LCD Built-in touch, PIP Parking Recording After a certain period after parking, it would change to a parking recording mode automatically and it saves an image with a low speed frame (5fps). When a vehicle starts to move, the parking recording mode would switch over to Normal/event recording mode.
2. Before Use- Product Features Parking LED Blinking When power is on, LED on the front of the product starts to slowly flick to protect the vehicle. The theft prevention LED is an auxiliary function to product the vehicle from any of improper approach. Voice Recording Selection This product is designed to record image and voice at the same time. However, when this button is pressed, only image would be recorded.
2. Before Use- Product Features Smart Phone Viewer With a Micro SD card, images saved on a smart phone can be easily played. Power Compensation With a built-in backup battery, our Car DVR still can continue the recording for about 10 minutes and saving the recorded images and sounds even if power is disconnected due to an external shock. Overwriting When the memory is full, files would be overwritten in an order of oldest.
2. Before Use- Product Features Free Voltage Power DC 12 V ~DC 24 V. Possible to be equipped at all types of vehicles. Firmware Update With a Micro SD card, update would be provided through firmware. Exclusive Viewer Program An exclusive viewer which allows the playing of images recorded from front camera and rear camera at once.
2. Before Use- Basic Components ※ These component images may different from the actual components, and they are subject to modification without notice in advance.
2.
3. Instruction 3-1 Menu- Quick Menu, Power On/Off Button ※ When power is on and LCD is touched on a basic recording screen, a quick menu mode would appear as the following. 1. Main : It is a button to change to a main menu. 2. Front : It is a button to view only front screen. By pressing this button again, it is possible to view only rear screen as well as divided screen. 3. Cancel : The execution of a quick menu button would be canceled.
3. Instruction 3-1 Menu –Main Menu Screen ※ When LCD is touched while a Car DVR is in recording, a quick menu mode would appear. 1. Image View : Normal recording, event recording, parking motion recording, and a list of manually recorded files would be shown and played. 2. Record Start : Press the record start button to start the recording of a Car DVR. It should be noted that recording would stop at a menu mode. 3.
3. Instruction 3-1 Menu- Image View Normal recording : It shows Normal saved files and in general, it is recorded in a unit of 1 minute. Event recording : It shows a list of files recorded in occurrence of event. Parking motion detection : It shows a list of files recorded in parking . Forced recording : It shows a list of files manually recorded. ※ If a files list is touched, the touched file would play. Press a cancel button during the play to return to the list.
3. Instruction 3-1 Menu- Time Setup After touching the desired item- year, month, date, press +/- button to change it to the desired date and time. Press an apply button to save the date and time. If a cancel button is pressed, the changed value would not be saved and it would return to a main screen.
3. Instruction 3-1 Menu- Configuration - Recording Image Resolution : It adjusts the recording image resolution. Default value is Low. If it is set as High, the size of a file becomes large and it results in shorter recording hours. Therefore, the resolution should be set to be best suitable for user’s condition. (Recommended value: Low) - SD Format : It is for formatting of a memory card. Check whether it is set to be FAT32 before format.
3. Instruction 3-2. LED Lamp Status LED Lamp is a signal of the current status of the product. Please refer the following table to understand the current status of your Car DVR.
3. Instruction 3-3 LCD Image Output A basic screen to be shown upon starting of the system is at a PIP mode (Picture In Picture) with front image and rear image.
3. Instruction 3-4 Format A format function is available for this product for user to initialize the memory in case of emergency and/or system error. Go to a main menu and select a configuration menu and then, click a format button. Important image data could be deleted upon formatting, so the format should be executed only when it is necessary.
3. Instruction 3-5. Parking Mode and Motion Detection Function If there is no movement of a vehicle for a certain period (about 20 min), it would change to a parking mode automatically. If any movement of other vehicle/object is detected in a parking mode, it would record for 10 seconds before/after the motion detection. If there is no further movement, the recording would stop and it would change to motion detection mode. When a vehicle starts to move, it would be changed to a general Normal recording.
3. Instruction 3-6. Image Storage Device This product detects shock caused by vehicle collision, quick stop and irregularities on roads and stores front and rear images before and after the shock in real time. Provided, it may not be stored as event shock recording due to shock sensitivity and/or vehicle condition, and if a corresponding image is not in an event folder, you should check it from the Normal recording image. This product saves a shock image along with time of the shock and speed data.
3. Instruction 3-8 Embedded High Sensitivity MIC This product is embedded with a high sensitive MIC. All the sounds from an accident and recording circumstances can be reproduced in a vivid manner. Sounds can be heard only with an exclusive viewer program. If you do not want to record voice for the protection of privacy, press the following button shortly. Then, Green LED would be turned off and voices would not be recorded.
3. Instruction 3-9. Antitheft LED Function As soon as it turns on, front LED would blink slowly for protecting the vehicle. Antitheft LED function is to protect the vehicle against theft during the parking. LED Flickering 3-10. Firmware Update This product can be easily updated with a SD card. Go to http://www.blacksys.co.kr/en (download= firmware) and download the latest firmware version.
3. Instruction 3-11 Memory Storage time (For 2CH) Memory storage time would be varied over memory capacity. Choose the memory capacity upon usage purpose. (Only authorized memory device must be used.) 4G(2~3 hours) 8G(5~6 hours) 16G(10~12 hours) 32G (20~24 hours) However, memory storage period could be varied over recording circumstances and image resolution.
3. Instruction 3-13. Save Folder and File Description This product saves files in name of year/month/date/hour/minute/second to easily find desired image. ※ Folder and File Name 4 folders would be generated in a memory card. Infinite : a folder for Normal recording files. One of this folder stores the images recorded for 1 hour. Event : a folder for event files. Motion : folder for the files recording during the parking. Select : folder for the files manually recorded.
3. Instruction 3-14 Rear Camera ※ In case of connecting a rear camera, a rear camera cord should be connected to the main unit first and then the black power should be turned on. If the Car DVR turns on first before connecting a rear camera, a rear camera would not be recognized and images from the rear camera would not be saved. ※ A rear camera should be installed with support from the installation specialist. ※ Image of a rear camera might be different from an actual device.
4. Memory Format Sequence 4-1. Memory Format Sequence 1. Open My Computer and then right click on a removable disk and select the format. 2. Make sure that a file system is FAT 32 and then click a start button.
4. Memory Format Sequence 4-1 Memory format sequence 3. When there is a warning that data would be erased upon format, click a confirm button. 4. Memory formatting process 5. When there is a message that format is completed, click a confirm button. ※ When format cannot be executed, it could be due to memory error and/or malfunction. Please exchange your memory. After formatting of the memory, it must be connected to the Car DVR when it is completely turned off.
5. Exclusive Viewer Program ※ From our website of www.blacksys.co.kr, please download an exclusive viewer program. 3 6 4 5 2 1 7 9 11 12 15 8 13 14 ① Front/rear image.
5. Exclusive Viewer Program Play previous file/ play current file/stop/Play next file/ rewind 10 seconds/fast forward 10 seconds/ change a frame/ open a file ● ● ● ● ● ● ● ● ● ● ● ● ● ● Capture : It is for capturing a current play screen and printing. Graph : It shows a status of a G sensor. Recording setup : It is for adjusting of the sensitivity of a G sensor and recording quality. Time setup : It is a window for setup of time of the Car DVR.
5. Exclusive Viewer Program Time Setup It is a screen for changing the time and date of the Car DVR. Select Year/Month/Date/Hour/Minute and click a confirm button to adjust time.
6. Installation 1. Select the installation location and wipe up the installation area. 2. It is recommended to install the product in between a room mirror and a front mirror. Make sure that the product does not interrupt the operation of a room mirror and cover the view. 3. Remove the vinyl on double sided tape and attach it to the front glass firmly. 4. Push the Car DVR to adjust its angle. (15 degrees in downward) 5. Connect the rear cable cord into the Car DVR.
Product Warranty This product has been manufactured under the thorough quality control process. If this product warranty is lost or information is not filled in properly, free repair service would not be provided. This warranty is valid in South Korea only. Product Name Car DVR KCC model MSIP-REM-SYV-BL-100 Warranty Period 12 months from the purchase date Model Name BL-100 Purchase Date 20 . Purchased Place Tel Address Seller .
Product Warranty ▶ Paid Service In the following cases, paid services would be provided. 1. After termination of the warranty period. 2. Within the warranty period. - When the product warranty is lost or not properly filled in. - Malfunction caused by improper use or user’s negligence. - Malfunction caused by force majeure event. - Malfunction caused by use of unauthorized optional devices. - Malfunction caused by improper power connection.
Product Warranty 2. In case of claiming of a service for serious malfunction in a normal use condition within 1 month after the purchase date, product exchange. 3. Malfunction and/or defect in normal use condition within the product warranty period. - In case of defect: free service . - If repair is not possible : product exchange or full price refund. - If exchange is not possible : full price refund. 4. Same defect over 3 times (4th time) : product exchange or full price refund. 5.
MEMO
MEMO
MEMO
MEMO
MEMO
CammSys Customer Support Center +82-70-4680-2595 ● ● ● ● Address : Seoul, Gangnam-gu, Yeoksam-dong 681-17, Daeil Building 3rd floor Opening hour : 09:00 ~ 18:00 (Mon. ~ Fri.) Closed : Saturday, Sunday, and Public Holiday Homepage : www.blacksys.co.
