Datasheet

SINEAX TV815
DC signal converter
The purpose of the signal converter SINEAX TV815 is to electrically insu-
late input and output signals, respectively to amplify and/or change the
signal level or type (current or voltage) of the input signals.
mA
V
VAC/DC
mA
V
Camille Bauer Metrawatt AG
Aargauerstrasse 7
CH-5610 Wohlen / Switzerland
Phone: [phone]
Fax: [phone]
[e-mail]
www.camillebauer.com
FEATURES / BENEFITS
• 3 way insulation (1500 V AC) between power supply, input and output
• Input programmable via DIP-switches for current and voltage
• Output programmable via DIP-switches for current and voltage
• Sensor powered by 2-wire technique (20 V DC stabilised, max 20 mA with
short-circuit protection)
TECHNICAL SPECIFICATIONS
General Data
Power supply 10…40 VDC / 19…28 VAC / 50-60 Hz
Power consumption max 2.5 W
Isolation Test voltage 1.5 kV AC rms
Basic accuracy 0.1% (by reference condition)
Resolution 11 bit
Response time 35 ms
Setting DIP - switches
Mounting 35 mm DIN rail guide
Material PBT (black)
Protection degree IP20
Operating temperature -20…+60°C
Weight 140 g
Dimension (w x h x d) 17.5 x 100 x 112 mm
Input (1x)
Voltage -20…20 V, min impedance 1 MΩ
Current -20…20 mA, max impedance 50 Ω
Output (1x)
Voltage 0…10 V, min load resistance: 20 kΩ
Current 0…20 mA, max load resistance: 600 Ω
Standard
Approval CE
Conformity EN 61000-4-5 Clas 2; EN 61000-6-2; EN 61000-6-4;
EN 61010-1
ORDER-CODE
Description Order-No.
SINEAX TV815 Voltage/current-signal converter 172 677
Rely on us.
Subject to changes • Issue 10.14 • Data sheet TV815_Le