User guide

 User Guide
Page 92
OSD Menu Operation
1.
Press the “Event” button to pop up the event menu
2. Using the “Up” / “Down” button to select a sub-menu
3. A selected sub-menu option will be pointed by a hand cursor and highlighted
4. Press “Enter” button to confirm the selection and pop up the sub-menu
EVENT STATUS : Show event status
EVENT LOG : Show the event log
CONNECTION LOG : Show the remote connection log
SETTING LOG : Show the setting log
OPERATION LOG : Show the operation log
1. If menu option end with [. . .] indicates sub-menu existing, you can always press “Enter”
button to pop up the sub-menu.
2. Press the “Back” button back to previous menu and “Live” button to exit menu.
Event Menu

 Event Status
ALARM : Show the alarm status
MOTION : Show the motion status
VIDEO LOSS : Show the video loss status
DISK FULL : Show the hard disk status
OVERHEAT : Show the overheat status
SYSTEM FAILURE : Show the system status
TAMPER : Show the arm, security switch and system tamper
status
POWER FAILURE : Show the status of power failure input
HDD AVAILABLE : Show the HDD ststus
CLEAR EVENT : Clear event
EVENT STATUS
ALARM 1234
MOTION 12
VIDEO LOSS - - 34
DISK FULL NORMAL
OVERHEAT NORMAL
TAMPER SYS/ARMSECSW
POWER FAILURE FAIL
HDD AVAILABLE . . .
CLEAR EVENT ENTER