User guide

 User Guide
Page 86
OSD Menu Operation
Main Menu

 Scan / Format Disk
DEVICE : Show the device type
START TIME : Show the start time of recording
END TIME : Show the end time of recording
MODEL NO : Show the device model no.
SERIAL NO : Show the device serial no.
CAPACITY : Show the capacity of the device
DISK USAGE : Show the disk usage in percentage
SCANDISK : Start HDD scanning operation
FORMAT : Start HDD formatting operation
Note :
Start time is the first recording time and end time is the latest recording time in RX. Select
[DEVICE] and use “Left” or “Right” button to choose RX-SE. It will show the
first and the lastest recording time of RX-SE in START TIME and END TIME. The
information under the scan/format disk sub-menu will be changed after formatted disk.
Main Menu

 Transmitter Information
TRANSMITTER NAME : Show the video recording server name
TRANSMITTER IP : Show the video recording server IP address
MODEL NO. : Show the video recording server model no.
SERIAL NO. : Show the video recording server serial no.
VERSION : Show the video recording server firmware version
TRANSMITTER INFORMATION
TRANSMITTER NAME RX364
TRANSMITTER IP 192.168.0.2
MODEL NO . RX364
SERIAL NO . VTCXXXXX
VERSION 01.00
SCAN / FORMAT DISK
DEVICE LOCAL
START TIME 22:35 20/06/06
END TIME 10:
07 15/11/06
MASTER MODEL NO XXXX
MASTER SERIAL NO XXXX
MASTER CAPACITY 400GB
SLAVE MODEL NO N/A
SLAVE SERIAL NO
SLAVE CAPACITY
DISK USAGE 52%
SCAN DISK ENTER
FORMAT DISK ENTER